Unsolved
This post is more than 5 years old
11 Posts
0
2768
September 24th, 2015 15:00
RPVM bandwidth control
Does RPVM support the bandwidth limit option that is found in the RP CLI? {config_link_policy -bandwidth_limit= }
Is there similar functionality elsewhere in RPVM to limit bandwidth?
Thanks!
No Events found!
Idan
675 Posts
0
September 30th, 2015 00:00
Hi,
RP4VM does support bandwidth limitation which can be configured via the config_link_policy CLI command.
Regards,
Idan Kentor
RecoverPoint Corporate Systems Engineering
idan.kentor@emc.com
forshr
2 Intern
•
1.1K Posts
0
September 30th, 2015 01:00
Yes it does from the CLI as you mentioned. Same rules apply.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
noamd1
1 Message
0
July 19th, 2016 08:00
Hi,
can I limit bandwidth globaly for all the system and not per CG?
Idan
675 Posts
0
July 19th, 2016 12:00
Not currently, you have the option to prioritize CGs and limit bandwidth on a per CG basis as well.
Regards,
Idan
Idan Kentor
RecoverPoint Corporate Systems Engineering
Twitter: @IdanKentor
ssearles
1 Message
0
January 11th, 2023 08:00
Idan, is this limited by default? I have an installation that is only pushing 20mbps on a gig link.
DELL-Josh Cr
Moderator
•
9.2K Posts
0
January 11th, 2023 10:00
Hi,
Thanks for your question. It should not have a limit by default. https://dell.to/3kbX463
Let us know if there is anything else we can help you with.
Abdul Quddus
1 Message
0
February 27th, 2024 14:02
Hi,
I am trying to replicate the VM from DC to DR from last 1 month, but it's taking too much time to sync.
so here I just want to know, is there any possibility to strict the bandwidth for CGs, like I have total 8 CGs & 7 CGs in Active mode & 1 CGs in initialization & I want 75% of the bandwidth dedicated to 1 CGs, which is in initialization mode.
For Example: - I have 100 Mbps dedicated bandwidth for VM Replication.
Looking Forward to here with positive response.
Thanks in advance.
Best Regards,
Abdul Quddus
DELL-Josh Cr
Moderator
•
9.2K Posts
0
February 27th, 2024 14:09
Hi,
Thanks for your question.
Yes, you can limit the bandwidth per CG. https://dell.to/42XkQ8w
Let us know if you have any additional questions.