Unsolved
This post is more than 5 years old
1 Rookie
•
116 Posts
0
340
March 12th, 2015 05:00
RPA two sites setup
I have a RPA setup from site 1 (Production) to site 2 (DR). The site 2 old VNX need to be decomisison. A new VNX2 will be deployed at site 2. Can I just add a copy using the existing CG to have the RPA sync the 2nd replica across to the VNX2? Once the sync is completed I can decomission the old copy. I saw the RPA documentation, most of it is talking about multisite setup and all require additional RPA cluster.
No Events found!
forshr
2 Intern
•
1.1K Posts
0
March 12th, 2015 08:00
Yes, as long as licensing allows for it you can add and remove copies independently.
wanaka
1 Rookie
•
116 Posts
0
March 12th, 2015 16:00
Yes I am running on EX license at this moment. I read those document as most seem to mention about 1 RPA cluster to two or more sites. That's where the confusing start that I need another new clusters at DR site in order to do that. I tested it in my lab end up the entire CG is paused. This is strange