Unsolved
This post is more than 5 years old
59 Posts
0
973
February 17th, 2017 03:00
RP and the Storage Replication Adapter for VMware SRM
Hi,
the RN for this product says that you can Group all SRM protection Group LUNs into a single or a number of RP Consistency Groups.
Does that mean that I can have one SRM protection Group and its LUNs are distributed over multiple RP CGs?
Thanks
Dieter
No Events found!
forshr
2 Intern
•
1.1K Posts
1
February 17th, 2017 13:00
Absolutely, just make sure that you enable SRM external management on all of the RP CGs.
Regards,
Rich
Mendocino
59 Posts
0
February 20th, 2017 07:00
Thanks Rich for the quick reply!
Is it furthermore recommended to apply parallel bookmarks on all CGs which are controlled by SRM?
forshr
2 Intern
•
1.1K Posts
1
February 20th, 2017 08:00
SRM cannot apply a parallel bookmark across the CGs in the PG. The only option would be to take the CGs out of SRM control, issue the parallel bookmark command. put the CGs back under SRM control (all scriptable) and then use the RP-VSI plugin to instruct SRM to use the parallel bookmarked snapshot as part of the test or failover.
Regards,
Rich