Unsolved
This post is more than 5 years old
1 Rookie
•
44 Posts
0
572
June 9th, 2016 06:00
replace vnx sp port with RP
Hi
I need to replace the vnx ports that zone with RP/SE with other ports on the vnx
What is the procdure to do it on production site?
No Events found!
forshr
2 Intern
•
1.1K Posts
0
June 9th, 2016 11:00
Hi Moshe,
Perform the zoning on the first fabric, then run SAN Diagnostics on each RPAs via boxmgmt followed by a check of the detected storage ports from the same menu.
Once you have completed process check the health of the system before continuing with the same process for the other fabric.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw