Unsolved
17 Posts
0
871
May 24th, 2021 10:00
RecoverPoint for VMs networking
Hello,
Can we deploy RP4VMs 5.3.1 with LAN/WAN/Data interfaces on the same subnet? It can have multiple interfaces, but all should be in the same subnet.
No Events found!
Unsolved
17 Posts
0
871
May 24th, 2021 10:00
Hello,
Can we deploy RP4VMs 5.3.1 with LAN/WAN/Data interfaces on the same subnet? It can have multiple interfaces, but all should be in the same subnet.
Top
charan25
17 Posts
0
May 24th, 2021 10:00
I got the answer from the install guide - "When using multiple network adapters, each adapter should be assigned an IP on a different subnet. Assigning adapter IPs on
the same subnet can cause connectivity issues that result in packets being sent through the wrong interface. If necessary,
combine multiple adapters according to your preferred network topology."
Idan
675 Posts
0
May 27th, 2021 06:00
That's correct @charan25, if you need to use the same network then configure a single vNIC on it. It's highly recommended to separate the Data from the WAN in any case. All-in-one (single vNIC) topologies are not recommended as by default, the data VMK would be the ESX management one.