Unsolved
This post is more than 5 years old
6 Posts
0
1937
May 10th, 2016 08:00
Recoverpoint upgrade?
Hi,
I have planed to upgrade RPA Clusters in both Production and DR sites to 4.4.SP1. But as Vmax is connected to DR RP Cluster, They suggested me to upgrade to code 4.1.2.3. So, I would like to know what are the fixes done between 4.1.2.3 to 4.4.SP1. That would help me while upgrading if anyone explains it.( Upgrading to use RP for XtremIO 4.0.2).
No Events found!
forshr
2 Intern
•
1.1K Posts
1
May 10th, 2016 09:00
Please refer to the latest 4.1 and 4.4 Release Notes for the fixes.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.
vkuri
6 Posts
0
May 10th, 2016 09:00
Hi Richard,
Can you explain on when we connect XtremIO 4.0.2 to RP 4.1.2.3 are their any concerns need to be checked or solved.