Unsolved
This post is more than 5 years old
1 Rookie
•
44 Posts
0
1191
October 31st, 2017 06:00
Recoverpoint for VM -- poor init performance
Hi expert,
I just built a POC RP4VM CRR environment, each site has two vRPA;s, the size of each vRPA is 4vCPU/8G, WAN connection is 1000Mbps(LAN speed actually), the link policy is low compression with no deduplication(default setting), but when monitor the network, the highest init speed is only 3MB/s, what is the issue? There's only one test CG esixt.
No Events found!
ankur.patel
2 Intern
•
286 Posts
0
November 3rd, 2017 12:00
Have you tried jumbo frames?
Dong_JH
1 Rookie
•
44 Posts
0
November 3rd, 2017 15:00
Not yet.
Dong_JH
1 Rookie
•
44 Posts
0
November 6th, 2017 05:00
Thanks. but how to set security communication mode to Accessible ？
forshr
2 Intern
•
1.1K Posts
0
November 6th, 2017 05:00
Try it again but with security communication mode set to Accessible.
Regards,
Rich
forshr
2 Intern
•
1.1K Posts
0
November 6th, 2017 06:00
Via the boxmgmt user.
Dong_JH
1 Rookie
•
44 Posts
0
November 8th, 2017 22:00
Thanks.
Let me take a try when i have a chance.