Unsolved
This post is more than 5 years old
1 Message
0
578
October 2nd, 2015 08:00
RecoverPoint EX support for VNX and XtremIO
Hi,
Can anyone confirm if you can configure both a VNX and an XtremIO (v4) behind a single physical RecoverPoint Cluster for remote replication, assuming all firmware being at latest level?
I know that the EX license allows multiple arrays but the documentation is a little vague around supportability for the XIO.
The reason for wanting in a single RP cluster is that this will be integrated with SRM, and my understanding is that the SRA can only point to a single array/RP Cluster.
Any help would be most appreciated!
Thanks,
No Events found!
forshr
2 Intern
•
1.1K Posts
0
October 3rd, 2015 06:00
Yes, not a problem but no mixing volumes within a copy and as you stated, EX licensing will be needed. The SRM interaction using the RP-SRA is per CG and directly impacts the remote replica containing the relevant replica volumes.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw