Unsolved
2 Posts
0
901
January 19th, 2020 05:00
reallocation of recover point DR site and chane ip's
Hello ,
we are planning to shutdown the recover point and move it to new location .
this RP cluster that will be moved is joined to the production RP cluster and replication is fine between them .
after we move it , we will change the ip's of lan and management and wan ip's will still the
same .
After power up at new site , how can i change to new ip's ?
should i open any new firewall ports between running RP cluster and lan and management ip's ? as i mentioned before wan ip's will not be changed .
should i re join the RP in DR site again after changing the ip's of lan or no need for this ?
Thanks in advance
No Events found!
DellEMCSupport
Moderator
•
631 Posts
0
January 20th, 2020 11:00
Hello Mahmoud Mohamed,
Here is the link to the administrator guide for RecoverPoint. If you look in Chapter 5 in the storage section it explains about changing ipaddress. https://dell.to/377TkY1
Please let us know if you have any other questions.
Mahmoud Mohamed
2 Posts
0
January 20th, 2020 23:00
Hello ,
Thanks for your support , but i have checked the Admin guide , it show options related to
storage box's discovered in RP .
i need to change the ip's of RPA cluster itself
Regards
Muhammad_Toffaha
13 Posts
0
January 25th, 2020 02:00
Hi Mahmoud,
Regarding the change of management IP's please follow the steps in Chapter 8 -Modifying cluster settings
RecoverPoint-Installation-and-Deployment-Guide
Hope that helps,
Muhammad Toffaha
Senior Technical Engineer- RecoverPoint and RecoverPoint for VMs
@vtoffaha
muhammad.toffaha@dell.com