Unsolved
This post is more than 5 years old
35 Posts
0
2080
April 25th, 2016 14:00
Power off and on RecoverPoint
Anyone know how to Power off and on a RecoverPoint? I need to move it and need step by step procedures. I have a VNX5700 connected to a VPLEX local connected to RecoverPoint.
No Events found!
wshah2
35 Posts
0
April 25th, 2016 14:00
This was helpful but what does a full sweep mean? I do not want to lose any data. Theres about 25TB of data and do you know how much downtime will be required to do this?
forshr
2 Intern
•
1.1K Posts
0
April 25th, 2016 14:00
If you adhere to the following steps you will avoid a full sweep. If avoiding a full sweep is not a priority then disable and enable the CGs.
1. Stop the host I/O (shutdown hosts).
2. Pause the CGs.
3. Shutdown the RPAs.
4. Shutdown the array (VPLEX, VNX).
In reverse after the redundancy test:
1. Power on the array (VNX, VPLEX).
2. Power on the RPAs.
3. Resume the CGs.
4. Start-up/power on the hosts.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.
forshr
2 Intern
•
1.1K Posts
0
April 25th, 2016 15:00
I should have stated full sync. This relates to replication only and is a full reinitialization of replication. Journal history is lost if this is what you mean by losing data.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw