Unsolved
This post is more than 5 years old
20 Posts
0
881
November 25th, 2014 06:00
mirrorview and recoverpoint on the same VNX
does anyone hae any documentation regarding whether or not you can have Mirrorview and Recoverpoint on the SAME san? our config is as follows
vnx1(recoverpoint se) has recoverpoint on it and its partner is san 2 is the target for san1 recoverpoint San 1 has 3 pools that are set aside for recoverpoint targets. San2 has a diffent set of pools on it that uses mirrorview to replicate to San3.
right now recoverpoin ex is not an option to go to but is being looked at
appreciate any help
No Events found!
rstickalnd
20 Posts
0
November 25th, 2014 06:00
thank you. that is what i thought.
ankur.patel
2 Intern
•
286 Posts
2
November 25th, 2014 06:00
you can do MV and RP on the same array as long as you arent using both technologies to protect the same lun
forshr
2 Intern
•
1.1K Posts
0
November 25th, 2014 11:00
Separate LUNs and separate SP ports. Also, just be aware that you may have to remove MV to enable RP.
Regards,
Rich