Unsolved
This post is more than 5 years old
2 Intern
•
522 Posts
0
854
December 30th, 2015 10:00
Linked Mode Support for RP4VM's with ESX 6.x
Hello,
Could I trouble someone from EMC to advise if RP4VM's supports Linked Mode virtual centers with ESX 6.0? There is a quick note in one of the docs that says it is fully supported and qualified with 5.5 for RP4VMs 4.3, but my customer has 6.x and I'd like to validate the support if possible before I try it out on the install. I'm assuming it will work, but with the changes in 6.0 its always best to validate
Thanks!
-Keith
No Events found!
fadliz
153 Posts
0
December 30th, 2015 13:00
That’s correct Keith. As stated in the doc, Linked Mode in 5.5 was qualified, if you have a 6.0 Linked mode env, please submit an RPQ.
Thx,
Zahid Fadli
EMC2
Twitter: @zDataGuy
echolaughmk
2 Intern
•
522 Posts
0
December 30th, 2015 13:00
Thanks Zahid. I will go down that route and have the customer break the mode for the initial install.