This post is more than 5 years old
4 Posts
0
1324
June 24th, 2016 07:00
Impact to Existing Replication if we put RPA cluster in Maintenance Mode
Need help in understanding effect on the Existing Replication for the configured CGs if we put RPA cluster in Maintenance mode. We need to reboot 2-RPAs in the cluster to get rid of Fan failure errors popped up post a DC Power outage.
No Events found!
forshr
2 Intern
•
1.1K Posts
0
June 24th, 2016 09:00
Reboot them one after the other ensuring that RPA1 is back up before rebooting RPA2 and you won’t have an issue.
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.
forshr
2 Intern
•
1.1K Posts
1
June 24th, 2016 08:00
No effect on replication. It just means no changes to the env.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.
K_CUBE
4 Posts
0
June 24th, 2016 08:00
Thanks Much Rich.
One other quick question,
We need to reboot RPA1 and RPA2. Prior to reboot do we need to pause replication on CGs with RPA1 and RPA2 used as preferred RPAs?