Unsolved
1 Rookie
•
25 Posts
0
90
February 26th, 2025 23:22
I'm planning upgrading vSphere 7.0 to 8.0 - does RPVM 5.3.4.1 support this upgrade?
Release Notes for 5.3.4.1 states that is "Supports vSphere 8.0 Update 2b version" - this is from June 2024 - am i going to run into any issues upgrading to the current vSphere version? (8.0 Update 3c) - is there anything i need to do in regards to RPVM while upgrading vCenter and esxi hosts?
Thanks!
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
February 27th, 2025 08:15
Hello cptkl0s,
Currently the release notes are for RP4VM 5.3 only support up to RP4VM 8.0 update 2b with certain conditions. I am not able to find any documentation that states that you can upgrade to version 8.0 update 3c.
cptkl0s
1 Rookie
•
25 Posts
0
February 28th, 2025 13:14
is there an official support matrix for RPVM? iIhave tried to find it - links in the Dell documents are either broken or simply send me to the "Dell Support" site, where i am unable to find anything.
DELL-Sam L
Moderator
•
7.5K Posts
0
February 28th, 2025 18:12
Hello cptkl0s,
To find information about the RPVM support matrix, you can refer to the specific support matrices provided for Dell EMC products. The support matrices outline the supported host operating systems, hardware, software, configurations, and limitations of the specified EMC products. For example if you had a unity system that you wanted to use RPVM then you would look under unity requirements.