Unsolved
This post is more than 5 years old
9 Posts
0
2166
February 17th, 2016 22:00
I do not see the link copy policy and policy links
Hi
RP4VM I'm using 4.3.1, but in some consistent group policy and I can not link to copy editor s policy. In fact, I do not see these links.
I entered my permanent software license.
Do you have any information about that?
No Events found!
Roadrunnerex
9 Posts
0
February 18th, 2016 00:00
Hi
vSphere Web client software to log back in again, the difference did not occur protected VM -> Manage -> RecoverPoint for VM screen is the following excerpt
Idan
675 Posts
0
February 18th, 2016 00:00
Hi,
I'm not sure I fully understand the issue here but try to refresh the Web client and also checkout the CG status by navigating to the protected VM -> Manage -> RecoverPoint for VMs.
Regards,
Idan Kentor
RecoverPoint Corporate Systems Engineering
Thoppay
20 Posts
0
February 20th, 2016 08:00
Hi,
From the initial screenshot, I could see that you are at Protection --> Consistency Group and you just moused over the link. We want you to click on the copy to show different right pane and give option to modify.
Hope it helps.
Thanks,
Suresh.
Roadrunnerex
9 Posts
0
February 20th, 2016 08:00
Hi
there is no link as follows,
Idan
675 Posts
0
February 21st, 2016 06:00
Can you elaborate on the issue here ? the init transfer status indicates you're performing an initialization - this is normal when seeing this status after creating a new CG, adding a copy, etc.