Unsolved
This post is more than 5 years old
2 Posts
0
1432
March 7th, 2016 16:00
How to add new CG group in the existing Recover Point Settings.
Hi,
I am just totaly newbie in EMC recover point world. Our recover point was configured by offshore EMC support last year. Now we have a need to add two more LUNs in the existing recover point. We have created two journal LUNs in both DR and PROD ESX and represented it to RPA.
We started initial CG group configuration from recover point wizard. Adter initial production journal configuration we reached to the step to choose DR copy. In this step we could not find those two new LUN in DR!
We thought RPA might not able to discover those two LUNs, thus cam back to first step and can find thow two LUNs are perfectly showing when I am choosing DR ESX !
Can anybody please advise what I am missing? I have attached both screenshot for your better understanding.
Regards,
Sandip
sandip9449
2 Posts
0
March 7th, 2016 20:00
Just realized that DR LUN was configured wrong (2GB) thus it was not reflecting. Once we fixed the size issue everything worked as expected. Thanks guys.
fadliz
153 Posts
0
March 7th, 2016 20:00
Hi, From the DRC1 image, it seems that the DR sees 2x 2TB LUNs, are those the ones you need? If so, select one of them, then click Next. If those are not the LUNs you're expecting to see, then to validate masking on the DR side, you can login to RP as admin user (SSH) and then run get_san_volumes, look for the LUNs in the output, if they're not there, check zoning/masking.
Thanks,
Zahid
RP Corp. Sys. Eng.