Unsolved
This post is more than 5 years old
1 Rookie
•
17 Posts
0
4077
December 19th, 2014 06:00
Cluster Management IP address...vRPA 4.1...how to change it
I recently built 2 vRPA clusters with 2 vRPA's at each site. (Virtual Recover Point 4.1 connection to VNX storage at each site..2 sites)
I've been told that I need to change the IP of one of the Clusters.
The Clusters have been connected but no Consistency groups are other configuration has taken place.
How/Where the heck do I change that IP?...and possibly the netmask as well. Seems simple enough .
Cheers
No Events found!
KUCAN
1 Rookie
•
17 Posts
0
December 19th, 2014 07:00
Ok..it's a bad day lol. Realized all I had to do was simply Putty into the RPA directly. Detached from the cluster and modify the Cluster. Easy menu to navigate.
KUCAN
1 Rookie
•
17 Posts
0
December 19th, 2014 08:00
Found it.
Under Other Operations.
Cheers
forshr
2 Intern
•
1.1K Posts
0
December 19th, 2014 08:00
If you make the change via the RP DM System Modification Wizard you can guarantee that the change will be made uniformerly across all the RPAs in each cluster.
KUCAN
1 Rookie
•
17 Posts
0
December 19th, 2014 08:00
I forgot to mention. When I run RecoverPoint Deployment Manager I don't see the "System Modification" wizard.
Just the RecoverPoint/SE Wizard and Connet Cluster wizard.
KUCAN
1 Rookie
•
17 Posts
0
December 19th, 2014 08:00
Where do I find that wizard? This is for a vRPA deployment and not physical.
After I changed the mgmt IP and rebooted all the RPA's the old IP came back for some reason. The new IP didn't take.
So that wizard is probably what I need.
forshr
2 Intern
•
1.1K Posts
0
December 19th, 2014 08:00
This is probbaly because you did not detach and re-attached the RPA(s) to the cluster. The Systems Modification wizard is one of the wizards you can run using the RecoverPoint Deployment Manager (DM) Tool.
hbib
8 Posts
0
September 30th, 2019 02:00
j 'ai la meme probleme, t peut m'aider apres l'ajout d'adress ip et l'attacher de cluster il ma demande de redemarrer ensuite tous le config est perdu
Idan
675 Posts
0
October 27th, 2019 06:00
Hi there,
Make sure to leverage Deployment Manager as it's the only supported way to perform this operation, if the operation fails, raise a SR with support.
Hope that helps,
Idan