This post is more than 5 years old
1 Rookie
•
33 Posts
0
981
June 26th, 2016 22:00
can recoverpoint 3.5 CDP be upgraded to CLR non-distruptive
Can recoverpoint 3.5 (EX/CL) CDP be upgraded to CLR non-distruptive ?
In the "System Modification Wizard" of Deploy Manager, can I modify the number of sites from 1 to 2, and then add 2nd site to environment with out CDP loss?
No Events found!
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2016 01:00
Yes
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
liuchuanwen
1 Rookie
•
33 Posts
0
June 27th, 2016 01:00
The current environment has AP7600, so 3.5 is only choice, and re-initialize is the only choice, thanks very much.
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2016 01:00
Or upgrade to 4.x and then connect the additional cluster as this restriction goes away.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2016 01:00
Unfortunately not. You would have had to specify two sites at the time you installed he first site.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2016 01:00
I'm afraid so.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
liuchuanwen
1 Rookie
•
33 Posts
0
June 27th, 2016 01:00
So I have to re-initialize the whole RP environment, including site1 and site2 ?