Unsolved
This post is more than 5 years old
2 Intern
•
522 Posts
0
492
February 24th, 2016 07:00
Automatic JVOL selection in RP4VMs
If using the automatic jvol selection with registered datastores in RP4VMs.....is the expectation that the choice of datastore will be spread evenly when the user creates and adds jvols? I am seeing uneven dispersion using this feature so have switches back to manual to balance this load manually, but was curious what the expectation is around this and if it is not expected, is there an enhancement to do this?
Thanks!
-Keith
No Events found!
forshr
2 Intern
•
1.1K Posts
1
February 24th, 2016 08:00
Hi Keith,
At this time we always select the datastore with the most available capacity.
Regards,
Rich
echolaughmk
2 Intern
•
522 Posts
0
February 24th, 2016 11:00
Thanks Rich,
I'll double back with one of my customers that is not seeing this and seeing one DS lopsided by a couple hundred GB using the automatic selection and that is what drove this question since I think I saw mention of what you state above, but it didn't seem to correlate to what I was seeing onsite.
I'll let you know.
Thanks!
-Keith