Unsolved
1 Rookie
•
18 Posts
0
1069
November 17th, 2021 09:00
5.3 to 5.3 SP2 issue
I'm trying to upgrade from 5.3 to 5.3 SP2. The first RPA upgraded, I can see from the VMware console "5.3.SP2(m.240)" while the other is "5.3(m.448)", but it didn't connect back to the cluster. I found this article about how to prevent it- https://www.dell.com/support/kbdoc/en-us/000182751/recoverpoint-for-vms-upgrade-from-5-3-0-x-or-5-3-1-0-may-hang-at-11-or-84-with-possible-error
It mentions steps to take before updating to prevent the problem. I don't see any suggestions of what to do if you didn't apply the script before the upgrade and lost the RPA.
No Events found!
TN_bosco
1 Rookie
•
18 Posts
0
November 17th, 2021 13:00
support connected, checked the RPA that hadn't reconnected to cluster after SP, editing a couple lines, reattached the node to the cluster, and then the other node updated. 5 minutes, I was good to go!