Unsolved
1 Rookie
•
25 Posts
0
529
March 1st, 2023 18:00
Mass update for PowerEdge R920 firmware
Hi All,
Anyone have an experience do a mass update of PowerEdge R920 firmware?
If have, can guide me how to do it. I'm try to use the DRM to create a bootable ISO but in DRM, it not found the R20 in the list. I also try to using the SUU ISO file but not very sure about the method to mounting the SUU ISO to pendrive since SUU ISO is non bootable ISO.
Please advise me on this matter. Thanks
Regards,
Mohd Zulhadi
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
March 1st, 2023 23:00
Hi @zulhadi,
Yes, you're correct. The SUU ISO is not bootable. You may need to use Lifecycle Controller to use the mounted ISO. You will need a mounting software to unload the files onto your USB (FAT32), alternative, if you have iDRAC Enterprise, you can use iDRAC virtual media.
Ref: https://dell.to/3J7tw3u
Ref: https://dell.to/3J33crs
Praveen.Singh
3 Apprentice
•
482 Posts
0
March 11th, 2023 01:00
try idrac V media
zulhadi
1 Rookie
•
25 Posts
0
March 11th, 2023 02:00
Hi @DELL-Joey C ,
Yes, the server have idrac enterprise license. So, that mean i can copy the iso to pendrive and using the idrac virtual media to point to the pendrive? Can you enlighten on this matter?
Praveen.Singh
3 Apprentice
•
482 Posts
0
March 11th, 2023 06:00
for virtual media, you can put the ISO file on your laptop or desktop through which you are accessing the IDRAC.
DELL-Young E
Moderator
•
5.1K Posts
0
March 12th, 2023 16:00
Hello, for reference https://dell.to/3ZIZGIw
zulhadi
1 Rookie
•
25 Posts
0
March 12th, 2023 19:00
Hi @Praveen.Singh ,
Do you mean, i can put the iso in any directory of my laptop (which laptop that I use for access the iDRAC)? And then on virtual media option in lifecycle controller, i just point the location to directory in laptop where i put the ISO file?
Praveen.Singh
3 Apprentice
•
482 Posts
0
March 12th, 2023 20:00
Yes exactly…!!