FX2S & FC630 UEFI0068

Hi,

I have Dell FX2S Chassis and 2 x FC630 with 2.5" SAS Drive and PERC H730 mini RAID controller.

On both FC630 I get the following message on boot-up:

UEFI0068: The mezzanine card configuration used is not supported on this Chassis. Make sure that a supported mezzanine card is used and retry the operation. For more information, see the platform Owner's Manual of the Chassis available at the support site.

In one FC630 I have dual port 57840S (JVFVR) 10GbE and the other quad port 57840S (JNK9N) 10GbE.

I've tried both FC630 with either single CPU or Dual CPU but still get the message above. I've also updated all the firmware with the same results.

If I press F1 to continue the FC630 continues to boot into the operating system (VMware)

Any suggestions as I'd like to avoid having to press F1 every time the FC630 boots up.

Thanks.