Unsolved
1 Message
0
73
August 1st, 2023 07:00
Connect SAS cable between poweredge et hp ultirium LTO6
Hello,
Recently ,we changed our backup app (Veeam) on rack server (dell poweredge R730)
i want to attach the server with HP ULTIRUM ROBOT (LTO6) with a cable SAS and SAS Card , but i didn't found the appropriate slot on a server
is there a solution to connect the robot and the server ?
No Events found!
Origin3k
4 Operator
•
2.2K Posts
0
August 1st, 2023 08:00
Depending on the RISER configuration when you bought the poweredge multiple SLOTs are at the back of the server. There are FullHeight or LowProviles one... the number will depends on the choosen config option in the past and if the Server is equiped with one or two CPU. The number of CPUs defined how many PCIe lanes are available for driving the PCIe slots. It range between 3 and 7 or so.
So check your HW and put the right card into the right slot and power the system on. If you would like to go for a Dell SAS HBA your need the Dell 12G SAS HBA which comes with 2 ports in total.
Regards,
Joerg