1 Rookie
•
16 Posts
0
296
January 9th, 2023 08:00
Adding in Backplane Cable for R6525
Hi,
I have a PowerEdge R6525, and I noticed that there is no cable connecting to the last two drive bays. If I wanted to populate these two drive bays, would it be as simple as plugging in a cable? If so, what cable would I need. Attached is a picture of where the is port on the backplane.
Thank you in advance!
No Events found!
DELL-Chris H
Moderator
•
9.5K Posts
0
January 9th, 2023 13:00
It should be that simple, if the drives were connected at the rear then there would be additional steps to connect.
techmanjesus007
1 Rookie
•
16 Posts
0
January 9th, 2023 12:00
Thank you! Would it be as simple as connecting that cable to the backplane, and then I'll be able to install drives in those last two drive bays? Or would there be some extra steps I would have to take?
DELL-Chris H
Moderator
•
9.5K Posts
0
January 9th, 2023 12:00
Techmanjesus007,
From what i am seeing, the cable needed would be part # F7WXD.
Let me know if this helps.
techmanjesus007
1 Rookie
•
16 Posts
0
January 9th, 2023 13:00
I appreciate the help!