Unsolved

This post is more than 5 years old

2 Posts

7142

May 19th, 2006 23:00

vertical line through screen

Can anyone tell me if they have seen a vertical line running from the top of screen to the bottom? It is a dell 2100mp. If so, can you suggest what to do?

95 Posts

May 25th, 2006 20:00

Have you tried resyncing the image once is shown on the display ? I have the same line but to the right like mirroring what's on the middle and resyncing fixed the problem even do it's back after turning off/on the projector.

2 Posts

June 8th, 2006 23:00

How do I resynch?

2 Posts

July 25th, 2006 23:00

My Dell 2200Mp is a little over 2 years. I recently started to get a dark bar that appeared diagonal across the upper right of the screen. I figured it was the bulb. I paid for a new bulb-ouch!

 

I've replaced the bulb. Now, the dark spot has gotten worse. It is more geometric. It has right angles and covers 3/4 of the viewing area. Some times, if I tap on the projector, the shadow moves. I have looked at everything-minus fully taking the projector apart.

 

I do not wish to take the projector apart. But, I have  removed some parts in order to blow compressed air into the projector. I've dusted this entire machine. Although it needed dusting, that didn't solve the problem. Is there something else I need to do? I have replaced the bulb, by following the online directions. I have cleaned the lens that is accessible beneath the bulb. What else?

No Events found!

Top