Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

dik mus

2 Posts

8242

November 29th, 2006 20:00

turn 2400mp projector on/off with rs232

Hi
 
I need to put the projector on and off bij a rs232 cable connected to my pc.
 
I already found a program that sends a textfile to the serial port. (sendfile)
Also I found the rs232 commands in the manual, but i can not translate that cryptical in fo into a simple text file.  I hope soemone has solved this before, and can provide the two textfiles, one to put the projector on, and one that turns it off
 
Thanks dik 

zervouli

2 Posts

January 14th, 2007 22:00

I just had to do the same thing and after a bunch of research came up with a solution.
I posted a simple howto here: http://memomat.com/dell2400mp.html
There are example batch scripts to turn on and off the projector from a Windows machine connected to the projector with an rs232 cable. You don't need to install any other software, but you may need to build a cable.

Good luck.

Was this post helpful?

View All

No Events found!

Top