Surprising call with the Hot line about the Dell M110

I just looked in the M110 manual and on page  13 (Connecting a Computer Using Wireless Dongle), it says, Your projector must be installed with the Dell wireless dongle if you want to use the wireless display.".

Hi

That is exactly what i'im trying with the dell dongle I bought

I found this video on Youtube to help me

It's ok to connect the computer to the dell wifi network create by the M110.  After the connection, I type the IP 192.168.100.10 in my navigator (proxy disable), but nothings appens.

I didn't have any acces to the dowload page to dl the binary file named  Dell_M110.exe (6'06 on youtube video)

Perhaps could you send me directly this binary file ??

Thanks

Franck

I do not see that file on our file library. Look on the CD that shipped with the projector.

Hi

That file is not on the CD. The CD just contain the manual in all languages

Franck

it's stored on the M110.

DL it from the "Projectors Homepage" when your PC is connected with the M110 WLAN.

but be warned: Video playback through the wireless dongle is a little bit sluggish.

Although i have this dongle too, i always use hdmi in the meantime.

Regards,

Pete04

Please note that the Wireless Dongle is like a hotspot,

- First you have to connect your computer to this hotspot (ssid is "FDP11" or something like this),

- Use the login code showing on the projector screen

- if your computer is connected, please check your IP adress, should be 192.168.100.x

- maybe you want to ping 192.168.100.10 from your computer to ensure the M110 is reachable

- Start Browser and go to 192.168.100.10

If this fails check your Personal/Windows Firewall and try to deactivate it for a short time or let it pass all traffic from/to 192.168.10.x

regards, Peter

Thanks, but the trouble is there

I have no access on the "projector Homepage" after my PC is connected with the M110

Regards

franck

Hi everyone!

i also have the same issue but i am using a macbook pro. i could not in any way access the download page or the GUI of the USB dongle. i also tried to use a windows 7 OS laptop but to no avail.

i also tried to use my iphone 4s using the mobi-show-pro for dell projector app but im getting an error that my phone could not establish a link to the wireless USB dongle.

any help could be greatly appreciated.

I already performed all of the steps but i still could not connect to M110 IP address.

my firewall is turned off and i can ping the IP address 10 times with no errors.

and i am using the log in information correctly.

i think, all i need the mac installer file for the dell wireless dongle.

anyone who can provide me the installer file or a link to it, would be my savior for my problem.

thank you in advance. =)

I have the same Problem. The Dongle is connected and the Computer (Macbook) is connected with the wireless lan.  I can't connect to 192.168.100.10.

I made a Portscan an i found a lot of open Port.

443 https
445
...
...
8080 old http

i try to connect to the "https" and "old http" Port, but it is not possible. i get an Error ('the connection has been reset.')

MISTER DELL PLEASE HELP ME.
I am very unhappy :'( 

I have the same problem with installation of wireless connection between m110 projector either to laptop :or to tablet Samsung or to mobile Samsung. Doesn't matter what: in each case I can't connect to recommended site 192.168.100.10

there is a firmware update out since 15. May 2012 maybe this fixes the problem. I have installed it because I want the ceiling mount option, but no luck this option is still missing. :emotion-6:

But before you install the firmware, you have to install some drivers that are downloaded from the projector. maybe there is also this dell installation file all of you want to have.

I have also downloaded a wireless Dell software for the "Dell 4610X Wireless Plus Projector" because this software has the ceiling mout option somewhere in the web interface menu. But it is useless since I did not get the wireless dongle I ordered yesterday, so I can't tell you if this software is also working with the Dell M110. Maybe one of you can test it. Furthermore if one of you have an Idea how to enable the ceiling mount option, please let me know!

I've downloaded the firmware directly form Dell Website. This link is german, but maybe you can just change language...

after you have downloaded the firmware, there is a manual inside. In oder to upgrade you need a A-A USB cable, I build one myself :)

Projector FW: M110_20120329_M0R003.img (need USB cable for update)

"Image Processor FW" : MST7286_MP_20120329_M13.BIN (just copy on Micro sd card)

and Media FW: Dell_8201_A56_20120326.bin (just copy on Micro sd card)

hope this help you!

Firstly, thanks a lot for your reply. Second - it is pleasure for me to get upgrading and updating and study more. Third - my appologies - I'm not so advanced user, and would like to get additional explanations as following (sorry for that!): a) where and how I could reach " firmware update out since 15. May 2012"; b) where and how I could reach some drivers that are downloaded from the projector? I never recognized them, where are they stored? c) may be much more easy (for you? for me?) to get the need "Software" directly from Dell site? what the problem is to do "Download free" accordingly to Tag #, that anyway should be used for each contact to "Dell support site"?  How porvide such option? Thanks in advance on your responce. Sincerely.