Unsolved
This post is more than 5 years old
1 Message
0
15765
December 23rd, 2011 16:00
M110 Orientation
I'd like to mount the M110 on the ceiling but I can't find anything in the manual
that states it can flip the image properly. Can it handle the four projection
methods: Front, Rear, Ceiling-Front, Ceiling-Rear?
Thanks.
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
0
December 25th, 2011 11:00
Your correct, the Manual does not mention anything about mounting to the ceiling. I did find Dell ceiling mount but they do not specify the M110.
pink4me
7 Posts
0
May 17th, 2012 07:00
I have the same problem. The ceiling mount option is missing. There is only Front and Rear :emotion-6:
I have downloaded the new firmware from 15. May 2012, but this option is still not available. I have searched through the firmware file with a Hex Editor and somewhere there was the Text CeilingMount. I think if it is possible to make Rear projection, it shouldn't be a problem to enable the ceiling mount option...
If you use your computer as the only source you can just flip the Image with the grafik card option. But for me I also use a digital cable receiver which prodcasts the signal with HDCP so the computer is not able to show this image (it is possible if you order a HDMI capture card that supports HDCP but for that mony I'll buy an other projector!).
If one of you have a solution for that problem please let me know!
LaurentMontreal
1 Message
0
June 28th, 2013 08:00
Same for me. Just installed my M110 on Ceiling to figure out that ceiling mode is missing. I can`t beleive that Dell released a projector without this mode.
Firmware update, pls?
fadupla
1 Message
0
October 28th, 2013 06:00
.