Unsolved
This post is more than 5 years old
1 Message
0
4643
October 11th, 2012 12:00
Dell TM S300wi Projector
I have the Dell TM S300wi Projector mounted to a wall mount arm. The projector, due to the location of the hookups to get in on the arm, is mounted upside down and therefore, the image is projected upside down. Is there any way to flip the image so that what is projected from a laptop shows right side up instead of upside down? Any help would be greatly appreciated. Thank you.
No Events found!
DELL-Nikhil D1
4 Operator
•
2.6K Posts
0
October 12th, 2012 02:00
Hi FCB1965,
Please try these steps to get the image upside down:
1.Switch on the projector.
2.Select the Menu button on the projector.
3.Use the left and right arrow to select Set Up and select it.
4.In the setup page select the option Projector Mode
Projected mode allows you to select the projector mode, depending upon how the projector is mounted.
•Front Projection-Desktop — This is the default option.
•Front Projection-Ceiling Mount — The projector turns the image upside down for ceiling-mounted projection.
•Rear Projection-Desktop — The projector reverses the image so that you can project from behind a translucent screen.
•Rear Projection-Desktop — The projector reverses and turns the image upside down. You can project from behind a translucent screen with a ceiling-mounted projection.
Select the option which best suits your projectors position.
Please reply for further help.