Unsolved
This post is more than 5 years old
3 Posts
0
16813
February 16th, 2013 14:00
Dell M110 no longer working
I switched it on today and got a screen with just black and white noise (very similar to this http://www.motionelements.com/media/s/53/513724/a-0527.jpg)
Is there anything I can do? Manual reset etc..?
No Events found!
Paperkrain
4 Posts
0
March 29th, 2013 08:00
oh my :S
Well, you can try one thing.
1. Turn on your projector.
2. Turn off your projector and wait for the cooldown.
3. Unplug all cables including the powercord.
4. Press and hold down the power button for 30 seconds.
5. Plug power and turn on.
If this doesn't work, you really should call Dell and tell them your problem. They have great customer service (eventually, once you get through ^_^)
Good luck
Joel1979
3 Posts
0
March 29th, 2013 13:00
Will try that thanks.
Joel1979
3 Posts
0
March 30th, 2013 09:00
Fixed it! Turns out the brown ribbon that connects the main board to the top bit was just a little loose. Pushed it back in and pushed the clip thingy closed and it's working fine now.