Unsolved
This post is more than 5 years old
1 Message
0
19390
July 12th, 2012 14:00
dell 5100mp problem - displays white/grey thin vertical lines
hi all,
I have a dell 5100MP. It has been working fine but recently when I turn on the projector, the images is fine for around 20 seconds, then it slowly breaks up and the goes completely white and then fuzzy white/grey vertical thin lines appear. If I turn the projector off and then back on straight away, it goes straight to the grey/white vertical lines.
If I turn the projector off and then try again the next day. I can see the image again for 20 seconds and then it goes again to the white/grey vertical lines.
Has my lamp gone? This happens on all sources so its definitely an issue with the projector.
Thanks
No Events found!
jjohannes
2 Posts
0
October 13th, 2013 14:00
I have the exact same problem. It seems to be some kind of heat related intermittent connection. When I press firmly on the top of the projector (in the vicinity of the "DELL" logo) the image returns, but only for a short while. Were you able to find a solution to this issue?
Cheers!
jjohannes