Unsolved
This post is more than 5 years old
1 Message
0
6403
September 11th, 2007 23:00
Dell 5100MP -> Extron gear
I have a Dell 5100MP and an Extron MLC 104 IP Plus. How can I verify on my projector that an RS-232 signal is being received? There is a driver from Extron that has the controls and the command sequence appears to be correct.
I need to verify that the RS-232 port on my projector is alive and well and that it's a configuration problem of some kind.
Anyone using Extron gear with their Dell projectors?
Thanks.
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
0
September 12th, 2007 11:00
How can I verify on my projector that an RS-232 signal is being received?
* You cannot. I mean, there is not a diagnostics that can say the RS-232 port is good or bad. The hope is that you would have a known working device and plug it in and tell us that your known working device is not being seen by our projector.