Unsolved
This post is more than 5 years old
2 Posts
0
3935
August 2nd, 2011 08:00
4610x projector
I have the projector mounted in the ceiling and the image is upside down. I went to setup>projector mode, there is only 2 icons not 4. I clicked on both and all it did was reverse the words. the image is still upside down.
No Events found!
DELL-Jesse L
Moderator
•
17.7K Posts
0
August 2nd, 2011 13:00
drafter1411,
Thank you for using the Dell Community Forum.
You should press CTRL ALT and the UP arrow key on your keyboard at the same time.
drafter1411
2 Posts
0
August 2nd, 2011 14:00
This didn't work. I'm helping another instructor with her projector. On my projector I have 4 Icons for projector mode.
she only has 2.
I tried the Ctrl-Alt up arrow on the computer key board nothing happen
BeachBum72
4 Posts
0
October 7th, 2011 10:00
You can always access the projector over the network if it has been wired and used the web admin interface to adjust the settings. I would see if there are firmware differences between the two projectors. I have several and all of them with the older firmware give me problems.