Unsolved
This post is more than 5 years old
2 Posts
0
55297
March 31st, 2015 06:00
4320 projector wireless doe NOT work with Mac OS 10.10 (or 10.7 and higher)
Hello, we just purchased a 4320 projector with the wireless dongle. The 4320 manual states that wireless connection works for Macs with 10.5 and higher. We use 10.10 (Yosemite), and we have updated to the latest firmware and s/w. We are able to connect to the 4320 and start a presentation. However, in less than a minute, the projector drops the connection and we have to start all-over, rendering the projector useless for wireless operation. The local Dell (Greece) says it is an Apple problem. This is the classic problem where one company blames the other. Even if it is Apple's fault, which I doubt, Dell mentions that the product should be compatible with 10.5 and higher. If we knew it was not compatible, we would have purchased another brand projector. So, is there a solution to this problem?
E. Papadopoulos
thatmediaguy
1 Message
0
June 16th, 2015 14:00
We're experiencing the same issue but the support forum isn't offering much help. based on google results, this issue happened back in 2012 and was corrected by a driver/firmware release. Is there a plan to resolve this problem on this projector?
avallach
1 Message
0
January 14th, 2016 17:00
Tonight we tried a similar setup, the Mac would connect, but after a short while would disconnect. Would like to use this in a consistent way, this is unusable as it stands.