Unsolved

This post is more than 5 years old

12532

January 26th, 2007 15:00

3100mp

My 3100mp projector turns on then goes off.  The lamp and fan come on but after a few seconds the red lamp light starts to blink.  The projector then shuts off with the fan following shortly after.  I need this projector for a presentation next week.  Any help would be appreciated

4 Posts

February 1st, 2007 04:00

lamp life might be over. Time to change to a new lamp

2 Posts

February 23rd, 2007 20:00

I have the same problem.
 
Have you managed to resolve the issue?
 
regards
 
Rob.

April 24th, 2007 22:00

I never resolved this issue.  I purchased a new projector.

2 Posts

April 25th, 2007 10:00

Starofthesea
 
That's unfortunate.
 
I have managed to get my projector fixed.
 
It turned out to be the lamp.
 
However I did not buy a new one but got the old one refurbished.
 
I used a web company called lamps4u.net.  I sent the projector and lamp to them who then informed me that they could fix the lamp and make a slight adjustment to it.  Better than new and completed within a week. Cost £125 + £15 carriage
 
Do you still have the projector?


Message Edited by rdunn87 on 04-25-2007 06:41 AM

April 25th, 2007 14:00

Yes I still have the projector.  Needed it in a hurry.  Thanks for the info.  I'll look into having it fixed.
No Events found!

Top