Unsolved
This post is more than 5 years old
2 Posts
0
16794
April 2nd, 2009 11:00
2400MP doesn't work with any remotes like the TSFM-IR01 they come with.
I have a problem with one of the 2400MP projectors we have. It doesn't seem to work with any of the TSFM-IR01 remotes we have. I am not aware of any way to resynch a remote to the projector or if that is even an option. I believe my remotes are actually working. Are these remotes coded to work with only a specific 2400MP? If not is there anything that I can try to resolve this issue besides simply trying to replace this projector?
No Events found!
Stepperrs
2 Posts
0
April 2nd, 2009 11:00
Let me revise the statement since it does respond partially.
If I manually turn on the projector it does work with the remotes. However none of the remotes will get it to power up out of stand by. I browsed the forums and saw no real resolve for this. It sounds like it is chalked up to a defective projector.
Any ideas to resolve this?
y0s1771
21 Posts
0
April 10th, 2009 09:00
You should be able to turn on/off projector via remote if not then maybe you had a defective projector.
Videngjim
1 Message
1
September 11th, 2012 07:00
We had exactly the same problem with our projector, the remote wouldn't turn on the projector, but would work fine after turning it on manually from the projector panel.
I don't know if this will work for everyone, but the solution I found was to unplug the projector power for 1 minute. After reapplying the power, the remote worked fine. Evidently this performs some type of logic reset on the projector.