Unsolved
This post is more than 5 years old
1 Message
0
7177
August 2nd, 2006 15:00
2200MP won't start up
The basic problem: When I press the power button on my
2200MP it makes a whirring sound like it is going to start up but nothing happens. It whirs back down and whirs back up again. This cycle goes on for 3-5 times and then the amber
lamp light comes on and the fan starts up. On top of this the power button will not turn it back off so the only way to turn it off is to unplug it.
Explanations and attempts: This originally occured a few months back. I assumed the lamp was dead and so ordered a new one. But lo and behold the
new lamp does the same thing. What's more, the warranty also expired a few months back. The only thing I can find as suggestions to solve the problem are to do a factory or lamp reset, which I can't seem to do without a display, or to blow the dust out of the machine, which I tried and it didn't help.
Is there anything left for me to try?
No Events found!
bless_tomato
2 Posts
0
September 8th, 2006 22:00
I have the exact same problem ! and I did the exact same thing, spent $30 on a new light bulb and it's still not working ! Did you get yours fixed ?
SkrienNeem
1 Message
0
November 23rd, 2006 07:00
ectjn
1 Message
0
December 5th, 2006 22:00