Unsolved
This post is more than 5 years old
1 Message
0
6631
June 17th, 2008 23:00
1201 Image Problem (pictures included)
Ok I just bought a ceiling mount for my projector and now the image is messed up. The left, top and right sides are square but the bottom slants up left to right. The only option I changed was to flip the screen because its now on the ceiling. I measured the distance from the screen to the wall and everything was good. Any help would be much appreciated.
http://i49.photobucket.com/albums/f272/senorrock/P6170019.jpg
http://i49.photobucket.com/albums/f272/senorrock/P6170027.jpg
http://i49.photobucket.com/albums/f272/senorrock/P6170026.jpg
No Events found!
DELL-Jesse L
Moderator
•
17.7K Posts
0
July 17th, 2008 18:00
Thank you for using the Dell Community Forum.
Go into the OSD Control Menu to the Management screen then to Projection screen to make adjustments.
Menu Location–Select the location of the OSD on the screen.
Projection Mode–Select how the image appears: °: Front Projection–Desktop (default).
°: Rear Projection-Desktop – The projector reverses the image so you can project from behind a translucent screen.
°: Front Projection–Ceiling Mount - The projector turns the image upside down for ceilingmounted projection.
°: Rear Projection–Ceiling Mount – The projector reverses and turns the image upside down. You can project from behind a translucent screen with a ceiling–mounted projection.