Unsolved
This post is more than 5 years old
1 Message
0
468
February 28th, 2018 15:00
S3845cdn SMB setup
We just purchased this printer and when setting up to scan via SMB to a machine, we are not getting the option to enter the password for the user under the SMB settings.
Any thoughts?
Thanks,
Mike
No Events found!
brad124
1 Message
0
April 2nd, 2018 14:00
Hello Mike,
I was able to resolve this issue, and wanted to offer an answer, since it seems hard to come by.
1. Log into the web portal with an admin login.
2. Navigate to System > Security > SSL/TLS Settings
3. Enable "HTTP - SSL/TLS Communication"
4. Enable "LDAP - SSL/TLS Communication"
I enabled both because I use both and I was able to add a password for the SMB setup afterwards.
*WARNING* Step 3 makes the admin password mandatory for the browser login, even if you changed your login method to "simple". I think step 4 is the one that actually resolves the issue, but having both is seriously recommended in my opinion.
Good luck,
-Brad