Unsolved
1 Rookie
•
3 Posts
0
3318
May 28th, 2021 11:00
How to Factory Reset for Dell Color MFP H625cdw ??
Hi,
Below is the step for Factory reset for Dell Color MFP H625cdw, Might this help!!
1) Turn Off your printer
2) Hold 4, 5, 6 and Turn on your printer
3) Enter 225
4) Printer Diag -> Ok
5) find Installation set -> Ok
6) find Nvm Init -> Ok -> Ok -> Ok
7) Go Back and find Complete -> Ok
Warm Regards
-Hitesh Patel
No Events found!
Dell Night
1 Rookie
•
2 Posts
0
February 11th, 2024 22:26
Thank you
That cleared error 016 757 invalid user on H625cdw
jbergsman6d91ab
1 Rookie
•
2 Posts
0
March 19th, 2024 22:39
I followed the instructions above. The result was a completely dead printer -- would not turn on or respone to any stimulus. I unplugged it and let it sit for about 20 minutes; nothing. Plugged it into a different socket; nothing. It's just, all of a sudden, dead.
would sure appreciate any help
Joel Bergsman
<Private data removed from public view. DELL-Admin>
(edited)
niagrawal
1 Rookie
•
6 Posts
0
September 4th, 2024 16:02
i followed the instructions above. reset not working. printer is stuck at the boot screen where dell logo is flashing. Appreciate any update
funphotog52
1 Rookie
•
2 Posts
0
March 12th, 2025 10:47
THANKS!!!! I have had this problem also! After HOURS with Tech support, on several occasions, I still would not work. Reinstalled all software, etc. Tried these steps, no avail. SO.. I unplugged from AC, Ethernet, and waited until #6 which said PROCESSING finished. THEN I hit OK, and tried various arrows to get back to top level where I finally found the COMPLETE. SO I went thru the same steps 4-7 several times, THEN I did the RESTART. Went thru the restart 3 times, and plugged Ethernet in, and tried to print. IT WORKED! Printed an Excel worksheet and it worked. Tech support had me convinced it was my Ethernet card. THANKS AGAIN!!