Unsolved
1 Message
0
130
January 27th, 2023 19:00
dell v313w
Yes I am inquiring as to the trouble with my dell v313w printer after installing a new print head. After installing print head,
the power to printer was dead, there is power to power block but it stops there. Any help appreciated
No Events found!
vishvajitd
2 Intern
•
278 Posts
0
March 3rd, 2023 22:00
If the power to your Dell V313w printer is dead after installing a new print head, here are some troubleshooting steps you can try:
Check power connection: Ensure that the power cable connecting the printer and power block is properly connected and not damaged. Also, check the power source outlet to ensure that it's working.
Reset the printer: Try resetting the printer by unplugging the power cable from the printer and power block for a few minutes, then plugging it back in.
Check the power block: Try using a different power block or adapter to see if that resolves the issue. If the printer powers up with a different power block, then the original power block may be faulty.
Check for any loose connections: Check for any loose connections inside the printer or on the print head that may be causing the power issue.
Contact Dell support: If none of the above steps work, then it's best to contact Dell technical support for further assistance. They may be able to provide additional troubleshooting steps or determine if there's a hardware issue with the printer.
Hopefully, these steps will help you identify and resolve the issue with your Dell V313w printer.