Dell E515ew multifunction printer not powering on

Follow the steps below to troubleshoot and resolve No Power issues on the 5330dn Dell Laser Printer.

Check Power Switch and Cable
Locate the power switch on the side of the printer and the power cable socket at the rear. Ensure the power cable is fully inserted and the power switch is on.

Switch the power off, reseat the power cable, and switch on.
Back to Top
Test Using Known Good Wall Socket and Cable
To isolate the fault to the printer itself either--

Test the printer using a wall socket and power cable currently working with other equipment, for example, a monitor or desktop PC.

Test the wall socket and power cable by connecting another piece of equipment.

Test with Consumables and Optional Items Removed
Remove the toner cartridge and fuser unit.
Remove any optional items such as additional RAM, hard drive, USB font card, additional trays, high capacity feeder, or output expander.
If the printer powers on with these items removed, reseat them one at a time to find the problem part.

Greeting,

Rachel Gomez

After I installed updated driver, I'm not able to start my e515dw printer.  When I try to boot, I get a ringtone and the lights flicker, then nothing.  after a little while, i hear the ringtone, but still doesn't boot up.