Unsolved
1 Message
0
495
April 12th, 2022 07:00
Dell c2660dn printer - colour calibration
Hi there,
I just replaced one of the toners in my c2660dn and since then the calibration has been out. The yellow is printing offset by a couple of mm.
I've tried changing settings and auto-calibrating, but nothing seems to work.
I've also tried manually changing the Color Registration Adjustments but when I click apply, the values go back to zero.
Any ideas?
Thanks!
No Events found!
vishvajitd
2 Intern
•
278 Posts
0
March 3rd, 2023 22:00
There are a few things you can try to fix the color calibration issue with your Dell c2660dn printer:
Make sure the toner cartridge is installed correctly: Double-check to make sure the toner cartridge is installed correctly and that it is the correct toner cartridge for your printer model.
Perform a manual calibration: You can perform a manual calibration by printing out the Color Registration Chart from the printer's menu and following the instructions to adjust the alignment of the colors. This may help correct the misalignment of the yellow color.
Clean the printer: Dust and debris can build up inside the printer and affect the quality of your prints. Use a clean, dry cloth to gently wipe down the inside of the printer.
Update the printer driver: Check if there is an updated driver available for your printer and install it if there is. This may help to fix any software issues that could be causing the color calibration problem.