Unsolved
1 Message
0
510
March 26th, 2022 19:00
Dell C1765nfw printing very faintly and unevenly
I haven't used this printer very much, but after replacing the toner, it only prints very faintly or not at all.
No Events found!
Unsolved
1 Message
0
510
March 26th, 2022 19:00
I haven't used this printer very much, but after replacing the toner, it only prints very faintly or not at all.
Top
vishvajitd
2 Intern
•
278 Posts
0
March 3rd, 2023 22:00
There are a few potential causes for this issue with your Dell C1765nfw printer. Here are a few troubleshooting steps to try:
Check toner levels: Make sure the new toner cartridge has been installed properly and is not empty or low on toner.
Clean the printer: Use a soft, lint-free cloth to gently clean the outside of the printer, as well as the inside of the printer where the toner cartridge goes.
Check the drum: The drum in the printer may need to be replaced. Consult your printer's user manual for instructions on how to check and replace the drum.
Check the fuser: The fuser is responsible for bonding the toner to the paper. If the fuser is not working properly, this can result in faint or uneven printing. Again, consult your printer's user manual for instructions on how to check and replace the fuser.
Run a cleaning cycle: Your printer may have a cleaning cycle that can help resolve issues with faint or uneven printing. Consult your printer's user manual for instructions on how to run a cleaning cycle.