Unsolved
This post is more than 5 years old
10 Posts
0
8714
March 1st, 2006 21:00
Can't update Firmware for 1600N
I can't update the firmware to the recommended version V.3.10, A01!
I downloaded the file R115236.EXE and extracted it.
The update program Update1600.exe does his job without an error message.
But the version numbers on the HTML page "Printer Information" doesn't change. After the update I get the following version numbers:
Printer Revision Levels:
Printer OS Version 1.23
Engine Version 6.1.02
NIC's S/W Version V1.11(1600n)
Thanks for any help
Widi
I downloaded the file R115236.EXE and extracted it.
The update program Update1600.exe does his job without an error message.
But the version numbers on the HTML page "Printer Information" doesn't change. After the update I get the following version numbers:
Printer Revision Levels:
Printer OS Version 1.23
Engine Version 6.1.02
NIC's S/W Version V1.11(1600n)
Thanks for any help
Widi
No Events found!
shadowlynx
151 Posts
0
March 3rd, 2006 19:00
Widi2000
10 Posts
0
March 4th, 2006 17:00
shadowlynx
151 Posts
0
March 6th, 2006 15:00
lancorp
2 Intern
•
343 Posts
0
March 10th, 2006 22:00
From what I've discovered, there are two versions of the 1600n. The first one had only 32MB ram installed (as noted in the self test page), and takes the earlier verison firmware (1.23). The latter has 64MB RAM and will contain the 3.10 firmware. If you look at the firmware's README file, you'll see "Updating Firmware on the Dell MFP Laser Printer 1600n to Version 3.10/1.23", so the older units only upgrade to 1.23, the newer units upgrade to 3.10.
I've tried updating the older units but they only upgrade to 1.23.