Unsolved
1 Rookie
•
18 Posts
0
29
May 15th, 2024 15:42
Sonnet Allegro Pro 4-Port USB 3.2 Gen 2 Type-A in Precision 7960
I bought a Sonnet Allegro Pro 4-Port USB 3.2 Gen 2 Type-A card for my 7960 to give me a few more ports; only problem is, it doesn’t seem to work. Plugging any USB device in results in nothing being detected. I’ve tried moving it to different slots, no joy there either. I’ve installed the relevant ASMedia drivers too.
Any diagnostic steps to figure this out would be appreciated.
It *could* be a duff card I guess…
Any diagnostic steps to figure this out would be appreciated.
It *could* be a duff card I guess…
No Events found!
Rain_HH
1 Rookie
•
56 Posts
0
October 31st, 2024 02:29
Yes, it works. I have it installed. It is all good, except when you are using the pre-boot diagnostics, you have to disconnect all the accessories connected to it; otherwise, the pre-boot diagnostics will not load.