Precision 5860XL Tower/Desktop - Intel RST-VROC RAID Failure - Not Logged in BIOS/Setup Event Log

In during due-diligence in evaluating adoption of RST-VROC as standard, I noticed / observed that, in a RAID Array or Volume is degraded due to hardware fault, this condition is:

1) Not logged in the BIOS Event Log

2) Does not show an alarm during the system POST / Pre-boot environment 

I was expecting both, in the same way that the Dell/EMC PowerEdge PERC Controller is customized and integrated into the EUFI Bios/Setup and the iDRAC9/Lifecycle Controller.

Hopefully these events are visible through Intel AMT on the desktop. (or the 0.01% of organizations that can afford to deploy Intel AMT).

So would this be foreseen in future BIOS / Microcode Updates?

~BAS