1 Rookie
•
2 Posts
0
1114
February 5th, 2024 03:33
Precision 5820 HDD bay configuration
Hi All,
I have a Dell Precision 5820 workstation that has 2x NVMe drives and 2x3.5" hot swap bays.
Am I able to swap out one of the NVMe to a 3.5" bay?
Cannot see how to easily pull out the NVMe - obviously the NVMe drive is easy to get out but the caddy sitting in the bay not so easy....
Hope this makes sense... ?
No Events found!
Chino de Oro
9 Legend
•
8.1K Posts
0
February 5th, 2024 05:45
While you can swap out the M.2 flexbay module with a 3.5" drive bracket, a hard drive will not work with the NVMe backplane. To remove the flexbay module, insert a paperclip to a small hole on the bottom of the module and push to release the lock while pulling the whole module out.
In another word, no, you can not use 3.5" hard drive in NVMe flexbay.
(edited)
Shodown
1 Rookie
•
2 Posts
0
February 7th, 2024 04:30
Yep, found a video eventually on how to remove the NVMe bay.
Was able to put a 3.5" caddy (with drive) in but orange LED flashes and not present in BIOS or OS.
Connectors on the back of NVMe bay is different to SATA even though SATA fits into it.....
So now looks like I need to find a 5.25 caddy and 5.25 to 3.25 adapter.....
Chino de Oro
9 Legend
•
8.1K Posts
0
February 7th, 2024 05:17
That will work. You can even use something like this for hot swap 3.5" HDD.
jdrch
2 Intern
•
179 Posts
0
November 10th, 2024 23:10
@Chino de Oro How would I get 2x 2.5in SSDs into a single front HDD slot? I imagine I could use 5.25 to 2x2.5in adapter + a SATA power splitter cable at the back to power both drives with the single SATA power cable from the motherboard, but it's not clear to me how I'd secure the adapter to the chassis. Are hot swap bays standard/interchangeable?
Chino de Oro
9 Legend
•
8.1K Posts
1
November 11th, 2024 02:53
@jdrch , I answered your question at your thread.
jdrch
2 Intern
•
179 Posts
0
November 30th, 2024 02:54
I saw, thanks very much!