What I would suggest is to reset the bridge back to factory and try again. The bridge can get confused in these circumstances, but the factory reset will take care of it.
Now I have an issue trying to connect with iSCSI to a Windows Server 2016. I configure the discover on the iSCSI initiator, but I don't get targets. On the bridge log I see:
bwcore[240]: iSCSI: New discovery session from iqn.1991-05.com.microsoft:proveeamem bwcore[240]: iSCSI: Login by iqn.1991-05.com.microsoft:proveeamem was successful bwcore[240]: iSCSI: Logout by iqn.1991-05.com.microsoft:proveeamem (Close Session) bwcore[240]: iSCSI: Connection closed by remote host(RX) ID=1
I don't understand why the connection is closed instantly, I'm using default port 3260 and not using authentication.
I have configured ir following the steps described on:
DELL-Chris H
Moderator
•
9.6K Posts
0
May 30th, 2023 08:00
Victoria_
For challenge key 6VVMVJHGX94 your temp pass would be EK79FZATMG7.
For challenge key 6VBB8P02573 your temp pass would be PFZX7SQG57M.
Let me know how it goes.
DELL-Chris H
Moderator
•
9.6K Posts
0
May 31st, 2023 07:00
What I would suggest is to reset the bridge back to factory and try again. The bridge can get confused in these circumstances, but the factory reset will take care of it.
Let me know how it goes.
Victoria_
2 Posts
0
May 31st, 2023 07:00
It worked!! Thaks a lot.
Now I have an issue trying to connect with iSCSI to a Windows Server 2016. I configure the discover on the iSCSI initiator, but I don't get targets. On the bridge log I see:
bwcore[240]: iSCSI: New discovery session from iqn.1991-05.com.microsoft:proveeamem
bwcore[240]: iSCSI: Login by iqn.1991-05.com.microsoft:proveeamem was successful
bwcore[240]: iSCSI: Logout by iqn.1991-05.com.microsoft:proveeamem (Close Session)
bwcore[240]: iSCSI: Connection closed by remote host(RX) ID=1
I don't understand why the connection is closed instantly, I'm using default port 3260 and not using authentication.
I have configured ir following the steps described on:
https://www.dell.com/support/kbdoc/es-es/000129042/powervault-tl2000-tl4000-how-to-configure-the-iscsi-bridge
I'll appreciate if you can give me some idea about why is closing the connection.
Thanks in advance!!