Unsolved
4 Posts
0
626
October 9th, 2021 20:00
Replacing existing hard disk to a new hard disk on PowerVault NX3100
I have PowerVault NX3100 with PERC H700 Integrated
I want to replace existing hard disk with raid configuration to a new hard disk. All of the hard disk is completely find, no failed hard disk. I just want to replace all of the disk with a new one. Can someone teach me how to do it without losing any data?
DELL-Chris H
Moderator
•
9.7K Posts
0
October 11th, 2021 06:00
Adzli,
If the Virtual Disk is Optimal then you should simply remove a drive, then rebuild it with a larger drive, you would need to do this one at a time and allow the drive to complete the rebuild, you would need to do this for each drive in the virtual disk. Afterwards it would using Online Capacity Expansion to use the space gained from the larger drives, or you could simply use the additional space as a new Virtual Disk.
Let me know if this helps.